TTP229 16 Channel Touch Sensor Module
FEATURES
-
Flux SKU:
BLBA100114 -
Length (mm):
60 -
Width (mm):
50 -
Height (mm):
12 -
Brand:
Unbranded/Generic -
Main Colour:
Blue -
Country of Manufacture:
China -
MPN:
BLBA100114 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Pin Pitch:
2.54mm -
Soldering Points:
Control configuration -
Mounting Hole Size:
M2.5 -
Mounting Dimensions:
43mm -
Format:
Serial -
Baud Rate:
9600(default) -
Chipset MPN:
TTP229 -
Switch Type:
Capacitive -
Switch Arrangement:
Keypad -
Keypad Coloumns:
4 -
Keypad Rows:
4 -
Cold Startup Time:
0.5s
DESCRIPTION
The module is ideally suited to adding touch control to your project. This is the TTP229 touch sensor module which can detect a human finger touching it. This allows you to replace those mechanical switches that have been holding back your project all this time.
When touched the module will drive the signal HIGH and put itself into touch mode. If not touched in the following 12 seconds the module will enter a low power mode which will increase the response time to 220mS but greatly reduce the power consumption. When in touch mode the module will have a speedy 60mS response time.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin | Description |
|---|---|
| VCC 3.3V DC Input | |
| GND | 0V |
| SCL | Serial clock |
| SD0 | Serial data |
| OUT1 Output 1 | |
| OUT2 | Output 2 |
| OUT3 Output 3 | |
| OUT4 | Output 4 |
| OUT1 | Output 5 |
| OUT2 | Output 6 |
| OUT3 | Output 7 |
| OUT4 | Output 8 |
