W5100 Ethernet Shield Module

Unbranded/Generic

  • Unit price per 

{"one"=>"Only {{ count }} left!", "other"=>"Only {{ count }} left!"}

FEATURES
  • Flux SKU:
    CCAA100012
  • Length (mm):
    32
  • Width (mm):
    25
  • Height (mm):
    25
  • Form Factor:
    UNO
  • Brand:
    Unbranded/Generic
  • Main Colour:
    Blue
  • Country of Manufacture:
    China
  • MPN:
    CCAA100012
  • UPC:
    Does Not Apply
  • Minimum Operating Temperature:
    -40°C
  • Maximum Operating Temperature:
    85°C
  • Number of Items:
    1
  • Hardware Compatibility:
    Arduino UNO
    Arduino DUEMILANOVE
    Arduino LEONARDO
    Arduino MEGA
    Arduino DIECIMILA
  • Pin Pitch:
    2.54mm
  • Pass Through:
    14 Digital I/O pins
    6 Analog I/O pins
  • Format:
    Ethernet
  • Chipset:
    W5100
  • Transmission Speed:
    10/100Mb/s
  • Chipset MPN:
    AMS1117 3.3
  • Buffer Memory:
    16K
  • Noted Onboard Components:
    7 Status LEDs
    Reset switch
    Micro SD card socket
DESCRIPTION
This shield is ideally suited to adding a web connection to your project. This is the W5100 Ethernet module which is compatible with all manner of microcontrollers. This allows you to build in web capabilities to your projects, from seeing sensor outputs from your browser to turning the lights on from a webpage.
The shield uses the ICSP connectors on the Arduino board for ethernet communication. Furthermore an onboard mini SD card slot that can be accessed by using the Arduino SD library, however uses the same connection as the Ethernet, care must be taken to use only one at a time.
This module sits on top of the Arduino unit itself. It is compatible with both the Arduino UNO and the MEGA. Furthermore, as access to the main reset switch is obstructed by the shield a second reset switch has been placed on the shield. This resets both the shield and the Arduino below it.
Please do not hesitate to contact us if you require further information regarding the shield's operation.
LED Description
PWR Board and shield power status
LINK Flashes in presence of network link and data transmission
100M Indicates presence of 100Mb/s network
FLUID Indicates network is full duplex
COLL Flashes when network collisions detected
RX Flashes when data received
TX Flashes when data transmitted

We Also Recommend