Future Kit Temperature & Humidity Controlled Relay - DIY Kit - FK957
FEATURES
-
Length:
60.2 mm -
Width:
111 mm -
Brand:
Future Kit -
Main Colour:
Green -
Country of Manufacture:
Thailand -
MPN:
FK957 -
Series:
FK -
Number of Items:
1 -
Packaging:
Retail -
Smart Home:
Universal -
Smart Home Protocol:
Wired -
Number of Phases:
1 -
Suitable (Noted projects):
Interior -
Application:
Electronics -
Kit Name:
TEMPERATURE AND HUMIDITY CONTROLLER WITH SENSOR -
Solder Level:
Through-hole -
Minimum Operating Temperature:
-50°C -
Maximum Operating Temperature:
115°C -
Standard:
RoHS Compatible -
Input DC Voltage:
12 V -
Input AC Voltage:
220 V -
Operating Current:
150 mA -
Maximum Rating Current:
1 A -
Type:
Electromechanical -
Channels:
2 -
Operating Voltage:
12V -
AC Rating:
12A 250V AC | 10A 30V DC -
Actuation Time:
<10ms -
Relative Humidty Detection Minimum:
0.2 -
Relative Humidity Detection Maximum :
0.9 -
Temperature Detection Minimum:
0°C -
Temperature Detection Maximum :
50°C -
Temperature Detection Error:
2°C -
Humidity Detection Error:
0.15
DESCRIPTION
This set is ideally suited to adding temperature and humidity sensing and control to your project. This module lets you control a 2 larger voltages, taking your detection project to new levels of capability, be it is a Weather station, greenhouse monitor or other project. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering with clear solder pads and an easy to read circuit board.
A trigger temperature and humidity can be set using the onboard microswitches. The temperature and humidity of which can be read off the onboard display. Once selected on reaching a the trigger temperature the relay will be activated.
This module contains a single channel relay module which can be used to activate up to 220V AC. This allows you to build in device control, operating heaters, misters or triggering systems when the module is supplied with a signal. This signal is provided by the probe which can be set to trigger at your desired temperature and humidity. The triggers are set and controlled using the onboard buttons.
