Keyestudio Dual DC Motor Driver Module
FEATURES
-
Flux SKU:
BMAA100004 -
Length (mm):
20 -
Width (mm):
20 -
Height (mm):
12 -
Brand:
Keyes -
Brand Series:
Keyestudio -
Main Colour:
Black -
Country of Manufacture:
China -
MPN:
KS-066 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Pin Pitch:
2.54mm -
Logic Level Voltage:
2.7 - 5.5V -
Drive Current:
1.2A (3.2A Peak) -
Control Modes:
CW
CCW
Short brake
Stop -
Over heat Protection:
Yes -
Chipset MPN:
TB6612FNG -
Noted Onboard Components:
Decoupling capacitors -
Noted Circuit Types/Features:
Standby control
DESCRIPTION
This module is ideally suited to motor control in your project. This is the TB6612FNG chipset based module which allows you to build in 2 controlled DC motors, controlling the speed with 2 PWM signals. This can be used with a wide range of microcontrollers including Arduino and Raspberry Pi.
The module allows the use of PWM to control the speed of up to 2 DC motors. The connected motors can be powered using up to 15V. The direction is then provided to each motor via 2 direction lines.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin | Description |
|---|---|
| PWMA | Motor A speed |
| AIN2 | Motor A direction |
| AIN1 | Motor A direction |
| STBY | Standby state |
| BIN1 | Motor B direction |
| BIN2 | Motor B direction |
| PWMB | Motor B speed |
| GND | Ground |
| VM | Up to 15V |
| VCC | 2.7 - 5.5V |
| GND | GND |
| A01 | Motor A |
| A02 | Motor A |
| B02 | Motor B |
| B01 | Motor B |
| GND | Ground |
