Keyes CNC Sheild
FEATURES
-
Flux SKU:
CCAA100066 -
Length (mm):
72 -
Width (mm):
58.7 -
Height (mm):
15 -
Brand:
Keyes -
Main Colour:
Red -
Country of Manufacture:
China -
MPN:
CCAA100066 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Hardware Compatibility:
Arduino NANO -
Pin Pitch:
2.54mm -
Pin Arrangements:
Abort/Hold/Resume
Emergency stop
3 Axis end stops
I2C
UART
Jumper based step setting
Reset switch -
Input DC Voltage:
12V External motor power -
Noted Onboard Components:
Step setting jumpers
Reset switch
A4988 Socket -
Noted Software Base/Features:
3 Axis CNC control
Spindle control
Coolant control -
Connector Type:
5.5mm DC Jack (2.1mm pin)
3 4988 Sockets
DESCRIPTION
This shield is ideally suited to converting a simple Arduino NANO into a CNC machining workhorse. The module provides 3 axis of control along with connections for limit switches, spindle control, an emergency stop, coolant control and hold buttons. The board is based on the well documented open source the use of GRBL.
The shield is designed to accept A4988 drivers. Each drivers step settings can be controlled via the onboard jumper connections. To power the motors a 12V DC supply is required which is then connected to the DC input. The logic on the other hand is powered from the Arduino itself.
Please do not hesitate to contact us if you require further information regarding the shield's operation.
