LC Technology 5V 5A Over-current Protection Relay Module
FEATURES
-
Flux SKU:
LBAA100028 -
Length (mm):
120 -
Width (mm):
80 -
Height (mm):
23 -
Brand:
LC Technology -
Main Colour:
Blue -
Country of Manufacture:
China -
MPN:
LC-Sensor-Relay-5V -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Pin Pitch:
2.54mm -
Input DC Voltage:
5V -
Mounting Hole Size:
M2 -
Mounting Dimensions:
40/34mm -
Type:
Electromechanical -
Channels:
1 -
Actuation Time:
<10ms -
Chipset MPN:
LM358 -
Noted Onboard Components:
Trigger potentiometer -
Sensor Property:
Current -
Current Detection Minimum:
0.3A -
Current Detection Maximum:
5A -
Frequency Detection Minimum:
20Hz -
Frequency Detection Maximum:
400Hz -
Sensor Diameter:
5mm
DESCRIPTION
This set is ideally suited to over-current protection to your project. This module lets you control a second voltage using the current detected in a wire. Combining a current sensor and relay, the current can be measured and compared against a trigger. If it exceeds it the relay will trigger.
A trigger current can be set using the onboard potentiometer. Once selected on reaching the trigger current the relay will be activated.
This module contains a single channel relay module which can be used to activate up to 250V AC and 30V DC. This allows you to build in device control, operating remote lights or triggering systems when the module is supplied with a signal.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin | Description |
|---|---|
| GND | 0V |
| VCC | 5V |
| Terminal | Description |
|---|---|
| NO | Open until triggered |
| COM | Common |
| NC | Closed until triggered |
