Keyestudio CNC Kit KS095 V3 4988 12V GRBL (Arduino-Compatible)
FEATURES
-
Flux SKU:
LCAA100017 -
Length (mm):
58 -
Width (mm):
57 -
Height (mm):
20 -
Brand:
Keyes -
Brand Series:
Keyestudio -
Main Colour:
Black -
Country of Manufacture:
China -
MPN:
KS0095 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Pin Pitch:
2.54mm -
Pin Arrangements:
Abort/Hold/Resume
3 Axis end stops
I2C
UART
Jumper based step setting
14 Digital I/O pins (6 offer PWM)
6 Analog input pins
ICSP
Large reset switch -
Input DC Voltage:
12-36V External motor power -
Drive Current:
40mA per I/O pin
50mA per 3.3V pin
2A with heatsink (A4988) -
Control Type:
Step/Direction -
Step Options:
1
1/2
1/8
1/16 -
Mounting Hole Size:
M3 -
Mounting Dimensions:
52/28mm -
Over heat Protection:
Yes -
Format:
USB -
Chipset:
ATmega16U2 -
Chipset MPN:
ATmega328P
A4988 -
Clock Clock:
16MHz -
Flash Memory:
32KB -
SRAM Memory:
2KB -
EEPROM Memory:
1KB -
Noted Onboard Components:
Step setting jumpers
Reset switch
4 A4988 Driver socket -
Noted Circuit Types/Features:
Adjustable drive current -
Noted Software Base/Features:
4 Axis CNC control
Spindle control
Coolant control -
Connector Type:
USB - B
5.5mm DC Power Jack
DESCRIPTION
This kit is ideally suited to converting a simple Arduino UNO into a CNC machining workhorse. The kit provides 3 axis of control along with connections for limit switches, spindle control, an emergency stop, coolant control and hold buttons. The board is based on the well documented open source the use of GRBL.
The shield is designed to accept A4988 drivers. Each drivers step settings can be controlled via the onboard jumper connections. To power the motors a 12 - 36V DC supply is required which is then connected to the screw terminals. The logic on the otherhand is powered from the Arduino itself.
Please do not hesitate to contact us if you require further information regarding the kit's operation.
