L293D 2 Channel Motor Driver Shield for ESP-12E

Unbranded/Generic

  • Unit price per 

{"one"=>"Only {{ count }} left!", "other"=>"Only {{ count }} left!"}

FEATURES
  • Flux SKU:
    CGBA100001
  • Length (mm):
    59
  • Width (mm):
    43
  • Height (mm):
    14
  • Brand:
    Unbranded/Generic
  • Main Colour:
    Black
  • Country of Manufacture:
    China
  • MPN:
    CGBA100001
  • UPC:
    Does Not Apply
  • Minimum Operating Temperature:
    -25°C
  • Maximum Operating Temperature:
    125°C
  • Number of Items:
    1
  • Parts list:
    1 L293D ESP12 Shield
  • Hardware Compatibility:
    ESP12 Dev
  • Pin Pitch:
    2.54mm
  • Pass Through:
    Complete pin pass-through
    UART
    SPI
  • Drive Current:
    1.2A
  • Maximum Power Dissipation:
    4W
  • Drive Type:
    Dual H-Bridge
  • Motor Type:
    2 DC Motor
    1 2/4 Phase Stepper
    2 Servo motors
  • Mounting Hole Size:
    M3
  • Mounting Dimensions:
    44/28mm
  • Over heat Protection:
    Yes
  • Chipset MPN:
    L293D
  • Noted Onboard Components:
    Reset switch
  • Noted Circuit Types/Features:
    High resolution timer (servo control)
DESCRIPTION
This shield is ideally suited to adding motor control to your project. This is the L293D dual H-Bridge module allows you to build in 2 DC motors, 1 stepper motor or a 1 servo. The shield is designed for the popular ESP12 microntroller board.
The shield requires an external power supply of 4.5 – 36V DC to be able to power DC or stepper motors. The ESP board itself requires a separate power supply of between 4.5 - 9V DC. The pair can be coupled together while in the lower values, this can be done by shorting the VIN - VM pins.
Please do not hesitate to contact us if you require further information regarding the shield's operation.
ESP Control pin Description
D1 Motor A
D2 Motor B
D3 Motor A
D4 Motor B

We Also Recommend