Automated Watering DIY Kit
FEATURES
-
Flux SKU:
LBAA100064 -
Length (mm):
190 -
Width (mm):
130 -
Height (mm):
24 -
Brand:
Unbranded/Generic -
Main Colour:
Multi -
Country of Manufacture:
China -
MPN:
LBAA100064 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Parts list:
1 Relay module
1 Moisture sensor
1 Sensor LM393 module
1 USB Power lead
1 4xAA Battery box
1 50cm Tube
1 Submersible pump
10 20cm Female to female jumper lead -
Input DC Voltage:
5V -
USB Powered:
Yes -
Type:
Electromechanical -
Channels:
1 -
AC Rating:
30A 250V AC
30A 30V DC -
Actuation Time:
<10ms -
Connector Type:
Screw terminals
DESCRIPTION
Here is a group of modules that when combined provide an automated watering system. A moisture sensor placed in a plant pot's soil is monitored. Once it falls below a certain moisture level, the connected trigger module will trigger and send a signal through to the relay. The relay, normally open, will close. Supplying power to the pump which will begin to pump water to the plant pot. Still monitoring the moisture level, the sensor will trigger once enough water is supplied. Closing down the pump. Completing a simple closed automation system that helps establish the concept for automated watering.
If you require further details or assitance please do not hesitate to contact us.