LC Technology MPU-9150 3 Axis Accelerometer Gyroscope Compass

LC Technology

  • Unit price per 

{"one"=>"Only {{ count }} left!", "other"=>"Only {{ count }} left!"}

FEATURES
  • Flux SKU:
    BDAA100050
  • Length (mm):
    22.5
  • Width (mm):
    10.5
  • Height (mm):
    11.5
  • Brand:
    LC Technology
  • Main Colour:
    Blue
  • Country of Manufacture:
    China
  • MPN:
    LC-AS-9150
  • UPC:
    Does Not Apply
  • Minimum Operating Temperature:
    -40°C
  • Maximum Operating Temperature:
    105°C
  • Pin Pitch:
    2.54mm
  • Logic Level Voltage:
    1.8V ±5%
  • Format:
    I2C
  • Address:
    0x68 - 0x69
  • Chipset MPN:
    MPU-9150
  • Output Type:
    16bit Digital
  • Sensor Property:
    3-Axis Accelration
    3-Axis Angular velocity (Gyroscope)
    3-Axis Compass (Magnetometer)
  • Field Detection Minimum:
    0µT
  • Field Detection Maximum :
    1200µT
  • Angular Velocity Detection Minimum:
    0°/s
  • Angular Velocity Detection Maximum :
    2000°/s
  • Acceleration Detection Minimum:
    -16g
  • Acceleration Detection Maximum :
    16g
DESCRIPTION
This module serves to breakout the MPU-9150 chipset, a chip capable of providing 3 axis acceleration, angular velocity and compass readings. The chipset features a 3 axis accelerometer (±2-16g), a 3 axis gyroscope(250-2000DPS), a 3 axis compass (±1200µT) and an internal dropout regulator to allow the use of 5V and 3.3V supplies.
When combined with free libraries it is possible to utilize the chipset's processing power to perform data conversions and combination for greater accuracy and precision in positioning calculations. Furthermore the INT pin provides an interrupt that signals when fresh data is available from the sensor to limit the need for continuous polling.
Communication is handled through a 2 pin I2C interface, available on a wide range of microcontrollers. The I2C address of can be set by driving the ADO pin to 0V for 0x68 or 3.3V for 0x69. EDA and ECL provide a master I2C interface if you wished to add further devices.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
GND 0V
SCL I2C Clock
SDA I2C Data
VCC 3.3V
INT Interrupt signal
ADO Address select
EDA Master I2C data
ECL Master I2C clock

We Also Recommend