LC Technology L3G4200D 3 Axis Gyroscope Module
FEATURES
-
Flux SKU:
BDAA100052 -
Length (mm):
17 -
Width (mm):
15 -
Height (mm):
12 -
Brand:
LC Technology -
Main Colour:
Blue -
Country of Manufacture:
China -
MPN:
LC-AS-4200 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Pin Pitch:
2.54mm -
Format:
I2C/SPI -
Address:
105 -
Chipset MPN:
L3G4200D -
Output Type:
16bit Digital (Angular velocity)
8bit Digital (Temperature) -
Sensor Property:
3-Axis Angular velocity (Gyroscope)
Temperature -
Field Detection Minimum:
-
Field Detection Maximum :
-
Angular Velocity Detection Minimum:
0°/s -
Angular Velocity Detection Maximum :
2000°/s -
Acceleration Detection Minimum:
-
Acceleration Detection Maximum :
-
Distance Detection Minimum:
-
Distance Detection Maximum :
-
Peak Operating Distance:
-
Relative Humidty Detection Minimum:
-
Relative Humidity Detection Maximum :
-
Temperature Detection Minimum:
-40°C -
Temperature Detection Maximum :
85°C -
Light Intensity Detection Minimum:
-
Light Intensity Detection Maximum :
-
Wavelength Detection Minimum:
-
Wavelength Detection Maximum :
-
Voltage Detection Minimum:
-
Voltage Detection Maximum :
-
Current Detection Minimum:
-
Current Detection Maximum:
-
Frequency Detection Minimum:
-
Frequency Detection Maximum:
-
Weight Detection Minimum:
-
Weight Detection Maximum:
DESCRIPTION
This module serves to breakout the L3G4200D chipset, a chip capable of providing 3 axis acceleration, angular velocity and compass readings. The chipset features a 3 axis gyroscope(250-2000DPS) and an internal dropout regulator to allow the use of 5V and 3.3V supplies.
When combined with free libraries it is possible to utilize the chipset's processing power to perform data conversions and combination for greater accuracy and precision in positioning calculations. Furthermore the INT pin provides an interrupt that signals when fresh data is available from the sensor to limit the need for continuous polling.
Communication is handled through a 2 pin I2C interface or 4 pin SPI interface, available on a wide range of microcontrollers. The method is selected by driving the CS pin to 0V for SPI or 3V for I2C. The I2C address by default is 105.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin | Description |
|---|---|
| INT | Interrupt signal |
| DR | |
| CS | Chip select |
| SDO | I2C Interface |
| VCC | 3.3 - 5V |
| SCL | I2C clock |
| SDA | I2C data |
| GND | 0V |
