FEATURES

Flux SKU:
BDAA100005
Length (mm):
31
Width (mm):
13
Height (mm):
15
Brand:
Unbranded/Generic
Main Colour:
Blue
Country of Manufacture:
China
MPN:
ACS712ELC-20A
UPC:
Does Not Apply
Minimum Operating Temperature:
-40°C
Maximum Operating Temperature:
85°C
Number of Items:
1
Pin Pitch:
2.54mm
Chipset MPN:
ACS712ELC-20A
Sensor Property:
Current
Field Detection Minimum:
Field Detection Maximum :
Angular Velocity Detection Minimum:
Angular Velocity Detection Maximum :
Acceleration Detection Minimum:
Acceleration Detection Maximum :
Distance Detection Minimum:
Distance Detection Maximum :
Peak Operating Distance:
Relative Humidty Detection Minimum:
Relative Humidity Detection Maximum :
Temperature Detection Minimum:
Temperature Detection Maximum :
Light Intensity Detection Minimum:
Light Intensity Detection Maximum :
Wavelength Detection Minimum:
Wavelength Detection Maximum :
Voltage Detection Minimum:
Voltage Detection Maximum :
Current Detection Minimum:
-20A
Current Detection Maximum:
20A
Frequency Detection Minimum:
Frequency Detection Maximum:
Weight Detection Minimum:
Weight Detection Maximum:

DESCRIPTION

This module is ideally suited to providing an accurate current measurement in the region of -20 to +20 Amps. A proportional voltage signal will be provided on the OUT pin, centred around VCC/2 (typically 2.5V for a 5V supply). The module operates on a change in output of 100mV per Amp. This provides a simple and effective way of monitoring current in your project.

Please note that the chip on-board this module uses the hall effect to measure the current and as such is susceptible to magnetic interference.

Please do not hesitate to contact us if you require further information regarding the module's operation.

Pin	Description
VCC	5V
OUT	Output
GND	0V