TowerPro MG959 Digital Servo Motor
Tax included. Shipping calculated at checkout.
Suitable (Noted projects):
Country of Manufacture:
Does Not Apply
Minimum Operating Temperature:
Maximum Operating Temperature:
Number of Items:
1 Stepper Motor
1 Arm set
0.16s/60°C (at 4.8V)
0.13s/60°C (at 6V)
6061-T6 Aluminium gear set and shaft
This component is ideally suited to projects requiring controlled rotation. This is the Tower Pro MG959 Servo and armature kit. These motors are compatible with a large range of shields like the common Arduino Motor shield. They are easy to use and can be added just about wherever you can find a 5V source.
This servo is pulse controlled. This means that supplying a pulse will move it to a particular angle. In this case 0° is a 1.5ms pulse, 90° a 2ms pulse and -90° is a 1ms pulse. This may not be set by your controller by default or give you the full range of movement as such you may wish to try up to 2.25ms and as low as 0.75ms. Be aware that if you go to far you can break the servo.