ACS712ELC-20A 20A Current Sensor Module Ammeter Arduino Pi Hall

BDAA100005
£2.99

3 in stock

This module is ideally suited to providing an accurate current measurement in the region of -20 to +20 Amps. A proportional voltage signal will be provided on t

FEATURES
  • Flux SKU:
    BDAA100005
  • MPN:
    ACS712ELC-20A
  • UPC:
    Does Not Apply
  • Length:
    31
  • Width:
    13
  • Height:
    15
  • Weight:
    2
  • Packaging type:
    OEM
  • Main Colour:
    Blue
  • Country of Manufacture:
    China
  • Drive Voltage:
    5V
  • Characteristics:
    -20 to 20A Measurement range
  • Chipset:
    ACS712ELC-20A
  • Pin pitch:
    2.54
  • Connectors:
    Screw terminals
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
DESCRIPTION
This module is ideally suited to providing an accurate current measurement in the region of -20 to +20 Amps. A proportional voltage signal will be provided on the OUT pin, centred around VCC/2 (typically 2.5V for a 5V supply). The module operates on a change in output of 100mV per Amp. This provides a simple and effective way of monitoring current in your project.
Please note that the chip on-board this module uses the hall effect to measure the current and as such is susceptible to magnetic interference.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
VCC 5V
OUT Output
GND 0V

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question