Keyestudio Vibration Sensor Module KS-037 801S 20cm Arduino Pi

BDAA100087
£2.89

3 in stock

This module is ideally suited to vibration sensing, typically seen in project robots and wobbily situations. The analog signal pin provides an analog output bas

FEATURES
  • Flux SKU:
    BDAA100087
  • Brand:
    Keyes
  • Brand Series:
    Keyestudio
  • MPN:
    KS-037
  • UPC:
    Does Not Apply
  • Length:
    38.5
  • Width:
    16.5
  • Height:
    9
  • Weight:
    6
  • Packaging type:
    OEM
  • Main Colour:
    Black
  • Country of Manufacture:
    China
  • Drive Voltage:
    3.3 - 5V
  • Characteristics:
    Analog output
    Digital output
    Trigger potentiometer
  • Chipset:
    801S
  • Mounting holes:
    M2.5
  • Pin pitch:
    2.54
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
DESCRIPTION
This module is ideally suited to vibration sensing, typically seen in project robots and wobbily situations. The analog signal pin provides an analog output based on the level of vibration available to the sensor. The digital signal pin outputs HIGH when the level goes above the trigger level and LOW when below it. The trigger level can be adjusted via the onboard potentiometer.
Working at a low 3.3 - 5V input the module will output HIGH values on detecting a vibration and LOW values while not detecting. A data LED is mounted onto the board that goes out when the sensor is triggered. Furthermore a mounting hole ensures you have some method of mounting the unit to all manner of projects.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
VCC 3.3 - 5V
GND 0V
DO Digital output
AO Analog output

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question