LC Technology Vibration Sensor Module LC-393 LM393 Arduino Pi

BDAA100137
£2.49

7 in stock

This module is ideally suited to vibration sensing, typically seen in project robots and wobbily situations. The digital signal pin outputs HIGH when the level

FEATURES
  • Flux SKU:
    BDAA100137
  • Brand:
    LC Technology
  • MPN:
    LC-393-Vibration
  • UPC:
    Does Not Apply
  • Length:
    30
  • Width:
    15
  • Height:
    20
  • Weight:
    4
  • Packaging type:
    OEM
  • Main Colour:
    Blue
  • Country of Manufacture:
    China
  • Drive Voltage:
    3.3 - 5V
  • Characteristics:
    Captive spring vibration sensor
    Digital output
    Trigger potentiometer
  • Chipset:
    LM393
  • Pin pitch:
    2.54
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
DESCRIPTION
This module is ideally suited to vibration sensing, typically seen in project robots and wobbily situations. The digital signal pin outputs HIGH when the level goes above the trigger level and LOW when below it. The trigger level can be adjusted via the onboard potentiometer.
Working at a low 3.3 - 5V input the module will output HIGH values on detecting a vibration and LOW values while not detecting. A data LED is mounted onto the board that goes out when the sensor is triggered.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
VCC 3.3 - 5V
OUT Digital output
GND 0V

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question