Infrared Obstacle Detection Module Panel E18-D80NK Arduino Pi

BDAA100153
£4.99

8 in stock

This module is ideally suited to obstacle detection, typically seen in project robots and entry alarms. Working at a low 5V input the module will output variabl

FEATURES
  • Flux SKU:
    BDAA100153
  • MPN:
    E18-D80NK
  • UPC:
    Does Not Apply
  • Length:
    18
  • Width:
    18
  • Height:
    45
  • Weight:
    30
  • Packaging type:
    OEM
  • Main Colour:
    Yellow
  • Country of Manufacture:
    China
  • Drive Voltage:
    5V
  • Characteristics:
    <2mS Response time
    3 - 80cm Range
    TTL Output
  • Draw Current:
    200mA
  • Form Factor:
    60cm Lead
  • Mounting holes:
    17mm
  • Interfaces:
    3-wire
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
DESCRIPTION
This module is ideally suited to obstacle detection, typically seen in project robots and entry alarms. Working at a low 5V input the module will output variable levels depending on the distance of the detected object.
A panel mounting hole ensures you have some method of mounting the unit to the robot.
IR (Infrared) is in a portion of the electromagnetic spectrum that is invisible to the naked eye. As such testing this module can be troublesome. A nice little trick to help; take a digital camera or smartphone camera and point the camera at the LED while it is lit. You will find most digital cameras show a gentle purple glow from the LED when it is lit.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
Red 5V
Yellow TTL Sensor state
Green Ground

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question