Moisture Detection Sensor Module Soil Water Arduino Raspberry Pi

BDAA100158
£2.69

6 in stock

This set is ideally suited to adding moisture detection to your project. This is the sensor module which can detect water droplets and relay a signal to a micro

FEATURES
  • Flux SKU:
    BDAA100158
  • MPN:
    BDAA100158
  • UPC:
    Does Not Apply
  • Length:
    31
  • Width:
    15
  • Height:
    7
  • Weight:
    4
  • Packaging type:
    OEM
  • Main Colour:
    Blue/Black
  • Country of Manufacture:
    China
  • Drive Voltage:
    3.3 - 5V
  • Characteristics:
    Analog output
    Digital output
    Trigger potentiometer
  • Form Factor:
    59 x 21 x 7mm Sized plate
    M3 15mm Plate mountings
  • Mounting holes:
    M2.5
  • Pin pitch:
    2.54
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
  • Included Items:
    1 2pin 20cm F-F Jumper wire
DESCRIPTION
This set is ideally suited to adding moisture detection to your project. This is the sensor module which can detect water droplets and relay a signal to a microcontroller or project. This allows you to build in water detection, for your weather, watering or other project.
The control board can output both digital and analog signals. The digital output will produce a HIGH signal until a set moisture threshold is detected upon which it is driven LOW. This will also light the DO-LED on the control board. The analog output will change with the level of water detected upon the plate.
Please do not hesitate to contact us if you require further information regarding the set's operation.
Pin Description
- Detection plate
+ Detection plate
VCC 3 - 5V
GND 0V
D0 Digital output
A0 Analog output

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question