Hall Effect Flow Meter YF-S201 Hydroponic Water 0-30lpm Arduino Pi

BDAA100184
£9.89

4 in stock

This sensor is ideally suited to meausring liquid across it. The sensor outputs a pulse that is relative to the speed at which the internal pinwheel is being tu

FEATURES
  • Flux SKU:
    BDAA100184
  • MPN:
    YF-S201
  • UPC:
    Does Not Apply
  • Length:
    62
  • Width:
    35
  • Height:
    35
  • Weight:
    52
  • Packaging type:
    OEM
  • Main Colour:
    Black
  • Country of Manufacture:
    China
  • Drive Voltage:
    4.5 - 24V DC
  • Recommended Voltage:
    5 - 18V DC
  • Characteristics:
    5V TTL Output
    1 - 30lpm Flow rate
    35%-80% Humidity range
    ±10% Accuracy
    2.0 MPa Maximum water pressure
    50% +-10% Output duty cycle
    0.04µs Output rise time
    0.18µs Output fall time
  • Draw Current:
    15mA (5V)
  • Form Factor:
    1/2inch Thread connectors
    15cm Lead
  • Pin pitch:
    2.54
  • Operating Temperature:
    -35°C to 80°C (unconfirmed)
  • Number of Pieces:
    1
  • Included Items:
    1 YF-S201 Flow sensor
DESCRIPTION
This sensor is ideally suited to meausring liquid across it. The sensor outputs a pulse that is relative to the speed at which the internal pinwheel is being turned. This can be calculated by dividing the output pulse by 7.5, which produces the flow rate in litres per minute. This makes for a simple and effective method for monitoring watering/hydroponic systems as well as other fluid based contol systems.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Wire Description
Black Ground
Yellow TTL Output
Red 5V DC

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question