25V Potential Divider Module
FEATURES
-
Flux SKU:
BDAA100209 -
Length (mm):
27 -
Width (mm):
13.5 -
Height (mm):
14 -
Brand:
Unbranded/Generic -
Main Colour:
Blue -
Country of Manufacture:
China -
MPN:
BDAA100209 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Pin Pitch:
2.54mm -
Noted Circuit Types/Features:
Potential divider -
Voltage Detection Minimum:
0V DC (5V)
0V DC (3.3V) -
Voltage Detection Maximum :
25V DC (5V)
16.5V DC (3.3V)
DESCRIPTION
This module is ideally suited to simple voltage reading by an analog pin on a microcontroller. The circuit operates by dividing the voltage across two resistors and measuring it in between them. The module is produces an output at a factor 5:1. The upper limit of the voltage is governed by the maximum input allowed on your microcontrollers analog pin. In the case of a normal Arduino UNO this would be 5V. This would allow a voltage up to 25V to be passed through the divider - producing 5V between the resistors.
Please be aware using this module with a voltage that may divide down to higher than your analog pins rating may cause damage to your microcontroller.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin | Description |
|---|---|
| - | 0V |
| NC | Not connected |
| S | Analog output |
