NFC RFID Module IC 13.56MHz PN5322 Card Key Fob Arduino SPI I2C

BEAA100036
£13.79

5 in stock

This module is ideally suited to adding wireless RFID/NFC compatibility to your project. This is a matched set combining a read and write module to interact wit

FEATURES
  • Flux SKU:
    BEAA100036
  • MPN:
    BEAA100036
  • UPC:
    Does Not Apply
  • Length:
    79
  • Width:
    48
  • Height:
    11
  • Weight:
    14
  • Packaging type:
    OEM
  • Main Colour:
    Blue
  • Country of Manufacture:
    China
  • Logic Voltage:
    3.3V DC
  • Drive Voltage:
    3.3 - 5.5V DC
  • Characteristics:
    RFID/NFC Reader
    Configuration switches
  • Draw Current:
    150mA Max supply current
    100mA Standby mode
    120mA Write mode
    120mA Read mode
  • Communication Format:
    NFC/RFID
    SPI
    I2C
    20P Raspberry Pi
  • Communication Chipset:
    CMH322 (PN532 Compatible)
  • Clock:
    13.56MHz
  • Mounting holes:
    M3 71/41mm
  • Pin pitch:
    2.54
  • Interfaces:
    Raspberry Pi 26P
    I2C
    SPI
  • Soldering Points:
    Chipset breakout
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
  • Included Items:
    1 NFC Reader module
DESCRIPTION
This module is ideally suited to adding wireless RFID/NFC compatibility to your project. This is a matched set combining a read and write module to interact with cards and devices. This module allows you to build in wireless communication and control, such as operating a remote access port.
The module operates on a frequency of 13.56 MHz. Communication with the module is done through SPI/I2C control connected to your microcontroller. These modules are ideal for use with the Arduino microcontroller range, however if you are planning on using it with a Raspberry Pi, the onboard 26P connector has you covered.
Please do not hesitate to contact us if you require further information regarding the set's use.

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question