NRF905 433 868 915 Mhz Wireless Radio Transceiver Module Arduino

BEAA100055
Sold out
£5.19

This module is ideally suited to adding wireless communication to your project. This set allows you to build in wireless communication and control, such as oper

FEATURES
  • Flux SKU:
    BEAA100055
  • MPN:
    MD-039
  • UPC:
    Does Not Apply
  • Length:
    32
  • Width:
    24
  • Height:
    23
  • Weight:
    8
  • Packaging type:
    OEM
  • Main Colour:
    Green
  • Country of Manufacture:
    China
  • Drive Voltage:
    2.7 - 3.3V
  • Characteristics:
    433/868/915 Mhz Working band
    170 Channels
    PLL Frequency stabilization mode
    FSK/GMSK Modulation
    +10dBm Maximum output power
    -100dBm Sensitivity
  • Draw Current:
    1?A Standby
  • Communication Format:
    RF
  • Communication Chipset:
    NRF905
  • Baud Rate:
    76.8K
  • Mounting holes:
    M2.5 15mm
  • Pin pitch:
    2.54
  • Connectors:
    M6 Antenna
  • Interfaces:
    SPI
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
  • Included Items:
    1 40mm Antenna
    1 Rubber dust cap
DESCRIPTION
This module is ideally suited to adding wireless communication to your project. This set allows you to build in wireless communication and control, such as operating remote lights or controlling an RC robot.
The module is designed to operate on a range of frequencies, 433/868/915Mh and is ideal for use with the Arduino microcontroller range where free libraries are available. It can however be used with other microcontrollers due to the widely used SPI interface.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
VCC Power supply
TXE RF Mode selection
CE Enable
PWR Power up chip
CLK Output clock
CD Carrier detect
AM Address matched
DR Receive and transmit ready
MISO SPI Output
MOSI SPI Input
SCK SPI Clock
CSN SPI enable
GND Ground

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question