NRF24L01+ 2.4GHZ Wireless Radio Transceiver Module Arduino

BEAA100056
£3.09

9 in stock

This module is ideally suited to adding wireless communication to your project. This set allows you to build in wireless communication and control, such as oper

FEATURES
  • Flux SKU:
    BEAA100056
  • MPN:
    MD-041
  • UPC:
    Does Not Apply
  • Length:
    33
  • Width:
    14
  • Height:
    13
  • Weight:
    2
  • Packaging type:
    OEM
  • Main Colour:
    Green
  • Country of Manufacture:
    China
  • Drive Voltage:
    1.9 - 3.6V
  • Characteristics:
    2.4GHz Free unlicensed band
    250 kbps, 1 Mbps and 2 Mbps on air data rates
    Automatic acknowledge sending with automatic retries
    RX/TX FIFOs with ACK user data possibility
    Up to 6 data pipes/addresses for simplified network
  • Draw Current:
    11.3mA Transmission
    26?A Standby
    900nA Power down
  • Power Rating:
    1mW Transmission
  • Communication Format:
    RF
  • Communication Chipset:
    NRF24L01+
  • Pin pitch:
    2.54
  • Interfaces:
    SPI
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
DESCRIPTION
This module is ideally suited to adding wireless communication to your project. This set allows you to build in wireless communication and control, such as operating remote lights or controlling an RC robot.
The module is designed to operate on the frequency 2.4GHz and is ideal for use with the Arduino microcontroller range where free libraries are available. It can however be used with other microcontrollers due to the widely used SPI interface.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
VCC 3.3 - 5V
CE Chip Enable
CSN Slave select
SCK Clock
MO Output
MI Input
IRQ Interupt
GND Ground

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question