CC1101 Wireless TX Module and Antenna RF1100SE Arduino SPI

BEAA100057
£6.19

1 in stock

This module is ideally suited to adding wireless communication to your project. This set allows you to build in wireless communication and control, such as oper

FEATURES
  • Flux SKU:
    BEAA100057
  • MPN:
    MD-042
  • UPC:
    Does Not Apply
  • Length:
    32.5
  • Width:
    17
  • Height:
    13
  • Weight:
    8
  • Packaging type:
    OEM
  • Main Colour:
    Blue
  • Country of Manufacture:
    China
  • Drive Voltage:
    1.9 - 3.6V
  • Characteristics:
    433Mhz Default Working band
    PLL Frequency stabilization mode
    2-FSK/GMSK/MSK Modulation
    RX/TX data 64-byte FIFO buffer
    -110dBm Sensitivity
  • Power Rating:
    10mW Transmission
  • Communication Format:
    RF
  • Communication Chipset:
    CC1101
  • Baud Rate:
    1.2 - 500K
  • Pin pitch:
    2.54
  • Interfaces:
    SPI
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
  • Included Items:
    1 40mm Antenna
    1 Rubber dust cap
DESCRIPTION
This module is ideally suited to adding wireless communication to your project. This set allows you to build in wireless communication and control, such as operating remote lights or controlling an RC robot.
The module is designed to operate on the frequency 433MHz and is ideal for use with the Arduino microcontroller range where free libraries are available. It can however be used with other microcontrollers due to the widely used SPI interface.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
VCC 3.3 - 5V
CSN Slave select
SCK Clock
SO Output
SI Input
GND Ground

FAQs

Have a Question?

Be the first to ask a question about this.

Ask a Question