ESP8266 Serial Wifi Transceiver Module ESP-201 Antenna Arduino

BEAA100137
£6.59

9 in stock

This module is ideally suited to adding wireless communication to your project. This set allows you to build in wireless communication and control, such as oper

FEATURES
  • Flux SKU:
    BEAA100137
  • MPN:
    ESP-201
  • UPC:
    Does Not Apply
  • Length:
    33.5
  • Width:
    26
  • Height:
    11
  • Weight:
    4
  • Packaging type:
    OEM
  • Main Colour:
    White
  • Country of Manufacture:
    China
  • Drive Voltage:
    3.3V
  • Characteristics:
    AT Command interface
    Wi-Fi Direct (P2P), soft-AP
    Integrated TCP/IP protocol stack
  • Draw Current:
    200mA (Unconfirmed)
  • Communication Format:
    UART
    802.11 b/g/n Wifi
  • Communication Chipset:
    ESP8266
  • Baud Rate:
    76800 (default)
  • Pin pitch:
    2.54
  • Connectors:
    U.FL Antenna
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
  • Included Items:
    1 20cm Antenna
DESCRIPTION
This module is ideally suited to adding wireless communication to your project. This set allows you to build in wireless communication and control, such as operating remote lights or controlling an RC robot.
The modules operate across a WIFI network. These modules are ideal for use with the Arduino microcontroller range and free libraries are available, however can be used with other microcontrollers.
A complete chipset breakout is available onboard to allow further development. These include 6 GPIO pins that are not available on the ESP-12. The chipset comes preloaded with AT firmware to open up available AT commands.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
3.3V 3.3V
RX Asynchronous data input (UART Receive)
TX Asynchronous data output (UART Transmit)
GND 0V

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question