ESP8266 Serial Wifi Transceiver Module

BEAA100138
£4.89

18 in stock

FEATURES
  • Flux SKU:
    BEAA100138
  • Length (mm):
    25
  • Width (mm):
    15
  • Height (mm):
    11
  • Brand:
    Unbranded/Generic
  • Main Colour:
    Black/Blue
  • Country of Manufacture:
    China
  • MPN:
    MD-263
  • UPC:
    Does Not Apply
  • Minimum Operating Temperature:
    -40°C
  • Maximum Operating Temperature:
    85°C
  • Number of Items:
    1
  • Pin Pitch:
    2.54mm
  • Logic Level Voltage:
    3.3V
  • Format:
    UART
    802.11 b/g/n Wifi
  • Chipset:
    ESP8266
  • Chipset Control:
    AT Command
  • Baud Rate:
    115200 (default)
DESCRIPTION
This module is ideally suited to adding wireless communication to your project. Features include Wi-Fi Direct (P2P), soft-AP and an Integrated TCP/IP protocol stack. This set allows you to build in wireless communication and control, such as operating remote lights or controlling an RC robot.
The modules operate across a WIFI network. These modules are ideal for use with the Arduino microcontroller range and free libraries are available, however can be used with other microcontrollers.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
1 UTXD Asynchronous data output (UART Transmit)
2 GND Ground
3 CH_PD Connect to 3.3V
4 GPIO2
5 RST Reset
6 GPIO0 Firmware mode
7 VCC 3.3V
8 URXD Asynchronous data input (UART Receive)

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question