LM2596 Step Down Module
FEATURES
-
Flux SKU:
BGAA100008 -
Length (mm):
66 -
Width (mm):
36 -
Height (mm):
14 -
Brand:
Unbranded/Generic -
Main Colour:
Blue -
Country of Manufacture:
China -
MPN:
BGAA100008 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Soldering Points:
Input/Output -
Input DC Voltage:
3.5-40V -
Maximum Conversion Voltage:
0.92 -
Output DC Voltage:
1.5-35V -
Voltage Regulation:
±0.5% -
Load Regulation Voltage:
±0.5% -
Drive Current:
2A (3A with heat sink) -
Chipset MPN:
LM2596 -
Noted Onboard Components:
Input/output voltmeter -
Response Time:
200µS
DESCRIPTION
This module is ideally suited to step a DC supply down to your projects required level to supply a prototyping board or microcontroller. Adjustments to the supply can be made with the use of the on board variable resistor.
The module features an onboard voltmeter readout to allow you to monitor the voltage levels on either the input or output terminals. The level displayed can be selected via the onboard micro switch. The addition of the display allows for the configuration of the voltage without the need to fiddle about with a multi-meter.
Used as a step down module you will be able to use a 12V input to supply a 5V output and a 24V input to output 12V. As a step up module you will be able to use a 12V input to supply a 15V. This allows you to use laptop brick-style power supplies to power your projects whatever they require.
As a result of a low switching frequency, the greater the input current the greater the inductance. Due to this high-frequency noise may be evident in the output.
Please do not hesitate to contact us if you require further information regarding the module's operation.
