Keyes 5V 2 Channel Relay Module MD-002 250V AC 30V DC Funduino

BHAA100010
Sold out
£3.19

This module is ideally suited to controlling multiple larger voltages with project. This is a 2 channel relay module which can be used to activate up to 250V AC

FEATURES
  • Flux SKU:
    BHAA100010
  • Brand:
    Keyes
  • Brand Series:
    Funduino
  • MPN:
    MD-002
  • UPC:
    Does Not Apply
  • Length:
    55
  • Width:
    46
  • Height:
    19
  • Weight:
    32
  • Packaging type:
    OEM
  • Main Colour:
    Red
  • Country of Manufacture:
    China
  • Logic Voltage:
    5V
  • Logic Levels:
    5V
  • Draw Current:
    50 - 60mA
  • Relay Type:
    Electromechanical
  • Relay Channels:
    2
  • Maximum Relay Ratings:
    10A 250V AC
    10A 30V DC
  • Relay Actuation Time:
    < 10ms
  • Communication Format:
    TTL Voltage
  • Mounting holes:
    M3 40/38mm
  • Pin pitch:
    2.54
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
DESCRIPTION
This module is ideally suited to controlling multiple larger voltages with project. This is a 2 channel relay module which can be used to activate up to 250V AC and 30V DC. This allows you to build in device control, operating remote lights or triggering systems when the module is supplied with a signal. This signal can come from a range of sources including most standard microcontrollers.
The module has 2 LEDs that inform of the state of the module. A red power activation LED that lights when a signal is received on the IN pin. When a signal is received a audible click can be heard as the relay triggers, connecting the output pins.
On board the unit is a jumper that can provide overall control. For normal operation the jumper is kept in place. This allows any signal on the input pins to trigger the relays. Removing the jumper prevents this from happening. The jumper can then be replaced by a sensor or circuit of some kind that makes the connection under certain conditions. We are thinking along the lines of when its bright outside there is no need for lights - a photosensitive resistor.
The pins are suited to standard sockets with a pin pitch of 2.54mm. Each relay has a set of screw terminals with labels to indicate the standard off state relationship between them.
Please do not hesitate to contact us if you require further information regarding the module's operation.
Pin Description
GND 0V
VCC 5V
IN1 0 or 5V/HIGH or LOW
IN2 0 or 5V/HIGH or LOW
COM Drive LOW to allow standard operation
GND 0V

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question