LC Technology PAM8302A 2.5W Mono Audio Amplifier Module
FEATURES
-
Flux SKU:
BJAA100024 -
Length (mm):
24 -
Width (mm):
16 -
Height (mm):
3 -
Brand:
LC Technology -
Main Colour:
Blue -
Country of Manufacture:
China -
MPN:
LC-AP-8302A -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Parts list:
1 7pin M-M 2.54mm header -
Pin Pitch:
2.54mm -
Soldering Points:
Input/Output -
Impedance:
4-8Ω -
Module Power Rating:
2.5W -
Mounting Hole Size:
M2 -
Mounting Dimensions:
12mm -
Over heat Protection:
Yes -
Short-circuit Protection:
Yes -
Chipset MPN:
PAM8302A -
Type:
Mono
DESCRIPTION
This module is ideally suited to adding a bit of amplification to your audio outputs. Connecting your audio inputs and a separate power 2.5 - 5V supply allows you to amplify an audio line in preparation to be connected up to a pair of speakers. This module is ideal for situations where a device is unable to drive with sufficient volume or in instances where an audio signal has been split across multiple outputs, such as using a splitter.
As with all audio devices, noise can and will come from all manner of sources. To minimise the noise added through the amplifier a clean power source should be used. If you are unsure, connecting a 470µF Electrolytic capacitor to either side should help cut it out.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin | Description |
|---|---|
| VCC | 2.5 - 5V |
| GND | Ground |
| SD | Chip enable |
| IN+ | Signal input |
| IN- | Signal input |
| VO+ | Output +ve |
| VO- | Output -ve |
