LC Technology TDA2030A Single Channel Audio Amplifier Module
Country of Manufacture:
Does Not Apply
Minimum Operating Temperature:
Maximum Operating Temperature:
Number of Items:
Low frequency amplifier
18W at 4Ω (0.5% Distortion)
This module is ideally suited to adding a bit of amplification to your audio outputs. Connecting your audio inputs and a separate power 6 - 12V supply allows you to amplify an audio line in preparation to be connected up to a speaker. This module is ideal for situations where a device is unable to drive with sufficient volume or in instances where an audio signal has been split across multiple outputs, such as using a splitter.
This module will require soldering to your desired connectors however large hand solder friendly well labelled holes are provided.
As with all audio devices, noise can and will come from all manner of sources. Even with low crossover and harmonic distortion it is important to minimise the noise added through the amplifier; a clean power source should be used. If you are unsure, connecting a 470µF Electrolytic capacitor to either side should help cut it out.
|VCC||6 - 12V|
We Also Recommend
Future Kit Stereo Audio Amplifier - DIY Kit - 20+20W Class D 12V - FK683
Regular price £16.99 £16.99
Future Kit Mono Audio Amplifier - DIY Kit- 100W Class AB 50V - FK666
Regular price £34.59 £34.59