Keyestudio L298N Dual H-Bridge Motor Driver Module
BMAA100005
£13.59
5 in stock
FEATURES
-
Flux SKU:
BMAA100005 -
Length (mm):
60 -
Width (mm):
55 -
Height (mm):
28 -
Brand:
Keyes -
Brand Series:
Keyestudio -
Main Colour:
Black -
Country of Manufacture:
China -
MPN:
KS-063 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Pin Pitch:
2.54mm -
Soldering Points:
C1 Capacitor -
Logic Level Voltage:
5V -
Drive Current:
2A -
Maximum Power Dissipation:
25W -
Drive Type:
Dual H-Bridge -
Motor Type:
2 DC Motor
1 2/4 Phase Stepper -
Mounting Hole Size:
M2.5 -
Mounting Dimensions:
50/45mm -
Format:
PWM -
Chipset MPN:
L298N -
Noted Onboard Components:
Large heatsink -
Noted Circuit Types/Features:
5V Supply
DESCRIPTION
This module is ideally suited to motor control to your project. This is the L298N Dual H-Bridge module which allows you to build in 2 controlled motors to your projects, controlling the speed with current. This can be used with a wide range of microcontrollers including Arduino and Raspberry Pi.
The module allows the use of PWM control of up to 2 DC motors or a single 2/4 phase stepper motor, the connections of which are screwed into the terminals. The module can be powered using 5 - 35V, furthermore if powered by a voltage greater then 7V the 5V terminal will be able to act as a 5V power source.
Soldering points for the addition of a C1 capacitor are available. This is only required if you were to use a supply that dipped a lot when the motors moved. With the capacitance value really being determined by the setup in use. A recommendation of n * 100uF for n = number of motors is a good starting point.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin | Description |
|---|---|
| ENA | Motor A Speed Control |
| IN1 | Motor A Direction Pin 1 |
| IN2 | Motor A Direction Pin 2 |
| IN3 | Motor B Direction Pin 1 |
| IN4 | Motor B Direction Pin 2 |
| ENB | Motor B Speed Control |
| Terminal | Description |
|---|---|
| VMS | 5-35V Input |
| GND | 0V |
| 5V | 5V input or output if VMS terminal connected to >7V |
| OUT1 | Motor A |
| OUT2 | Motor A |
| OUT3 | Motor B |
| OUT4 | Motor B |
