LC Technology L298N Dual H-Bridge Motor Driver Controller Module
FEATURES
-
Flux SKU:
BMAA100015 -
Length (mm):
58 -
Width (mm):
44 -
Height (mm):
30 -
Brand:
LC Technology -
Main Colour:
Blue -
Country of Manufacture:
China -
MPN:
LC-Motor-298 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Pin Pitch:
2.54mm -
Logic Level Voltage:
5V -
Drive Current:
2A -
Module Power Rating:
25W -
Mounting Hole Size:
M3 -
Mounting Dimensions:
49/36mm -
Format:
PWM -
Chipset MPN:
L298N -
Noted Onboard Components:
5V Regulator
DESCRIPTION
This module is ideally suited to motor control in your project. This is a L298N based Dual H-Bridge module which allows you to build in 2 controlled motors to your projects, controlling the speed with current. This can be used with a wide range of microcontrollers including Arduino and Raspberry Pi.
The module allows the use of PWM control of up to 2 DC motors or a 2/4 phase stepper motors, the connections of which are screwed into the terminals. The module can be powered using 5 - 35V, furthermore if powered by a voltage greater then 7V the 5V terminal will be able to act as a 5V power source. The logic level can be powered by USB if desired.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin | Description |
|---|---|
| IN1 | Motor B control 1 |
| IN2 | Motor B control 2 |
| IN3 | Motor A control 1 |
| IN4 | Motor A control 2 |
| EN1 | Motor B enable |
| EN2 | Motor A enable |
| Terminal | Description |
|---|---|
| VSS | 5V Logic supply |
| VS | Drive voltage |
| GND | Common ground |
| OUT1 | Motor B control 1 |
| OUT2 | Motor B control 2 |
| OUT3 | Motor A control 1 |
| OUT4 | Motor A control 2 |
