VNH2SP30 High Power Dual H-Bridge Module
FEATURES
-
Flux SKU:
BMAA100023 -
Length (mm):
54.5 -
Width (mm):
28.2 -
Height (mm):
12 -
Brand:
Unbranded/Generic -
Main Colour:
Red -
Country of Manufacture:
China -
MPN:
BMAA100023 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Parts list:
1 Dual Motor VNH2SP30 Red Module
1 7pin M-M 2.54mm Jumper -
Pin Pitch:
2.54mm -
Soldering Points:
Screw terminal points -
Logic Level Voltage:
5V -
Drive Current:
Up to 30A -
Drive Type:
Dual H-Bridge -
Mounting Hole Size:
M3 -
Mounting Dimensions:
50/23mm -
Over heat Protection:
Yes -
Format:
PWM -
Data Rate:
≤20kHz -
Chipset MPN:
VNH2SP30 -
Sample:
Current value -
Noted Circuit Types/Features:
Opto-coupled PWM inputs
DESCRIPTION
This module is ideally suited to motor control to your project. This is the VNH2SP30 based high power dual H-Bridge module which allows you to build in 2 controlled motors to your projects, controlling the speed with current. This can be used with a wide range of microcontrollers including Arduino and Raspberry Pi.
The module allows the use of PWM control of up to 2 DC motors, the connections of which are screwed into the terminals. The module can be powered using 5.5V-16V supply.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin | Description |
|---|---|
| IN2 | Control input 2 |
| IN1 | Control input 1 |
| VIN | 5V |
| Terminal | Description |
|---|---|
| + | Input voltage |
| - | Input ground |
| OUTA | Output voltage |
| OUTB | Output voltage |
