Keyestudio TTP229 16 Channel Touch Shield

CBAA100004
£9.09

2 in stock

FEATURES
  • Flux SKU:
    CBAA100004
  • Length (mm):
    85
  • Width (mm):
    56
  • Height (mm):
    19
  • Brand:
    Keyes
  • Brand Series:
    Keyestudio
  • Main Colour:
    Black
  • Country of Manufacture:
    China
  • MPN:
    KS0210
  • UPC:
    Does Not Apply
  • Minimum Operating Temperature:
    -40°C
  • Maximum Operating Temperature:
    85°C
  • Number of Items:
    1
  • Parts list:
    1 Pi Keypad shield
  • Hardware Compatibility:
    Rasperry Pi A+
    Rasperry Pi B+
    Rasperry Pi 2B
    Rasperry Pi 3B
  • Pin Pitch:
    2.54mm
  • Mounting Hole Size:
    M2.5
  • Mounting Dimensions:
    58/49mm
  • Format:
    I2C
  • Address:
    0x57
  • Baud Rate:
    10000
  • Chipset MPN:
    TTP229-LSF
  • Switch Type:
    Capacitive
  • Switch Arrangement:
    Gamepad
  • Number of Keys:
    16
  • Cold Startup Time:
    0.5s
DESCRIPTION
The shield is ideally suited to adding touch control to your project. This is the TTP229 touch keypad shield which can detect a human finger touching it. This allows you to replace those mechanical switches that have been holding back your project all this time.
When touched the module will drive the signal HIGH and put itself into touch mode. If not touched in the following 12 seconds the module will enter a low power mode which will increase the response time to 220mS but greatly reduce the power consumption. When in touch mode the module will have a speedy 60mS response time.
Please do not hesitate to contact us if you require further information regarding the shield's operation.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question