W5100 Ethernet Shield Module
Country of Manufacture:
Does Not Apply
Minimum Operating Temperature:
Maximum Operating Temperature:
Number of Items:
14 Digital I/O pins
6 Analog I/O pins
Noted Onboard Components:
7 Status LEDs
Micro SD card socket
This shield is ideally suited to adding a web connection to your project. This is the W5100 Ethernet module which is compatible with all manner of microcontrollers. This allows you to build in web capabilities to your projects, from seeing sensor outputs from your browser to turning the lights on from a webpage.
The shield uses the ICSP connectors on the Arduino board for ethernet communication. Furthermore an onboard mini SD card slot that can be accessed by using the Arduino SD library, however uses the same connection as the Ethernet, care must be taken to use only one at a time.
This module sits on top of the Arduino unit itself. It is compatible with both the Arduino UNO and the MEGA. Furthermore, as access to the main reset switch is obstructed by the shield a second reset switch has been placed on the shield. This resets both the shield and the Arduino below it.
Please do not hesitate to contact us if you require further information regarding the shield's operation.
|PWR||Board and shield power status|
|LINK||Flashes in presence of network link and data transmission|
|100M||Indicates presence of 100Mb/s network|
|FLUID||Indicates network is full duplex|
|COLL||Flashes when network collisions detected|
|RX||Flashes when data received|
|TX||Flashes when data transmitted|
We Also Recommend
Keyestudio ATmega328P Board KS0172 16 (Arduino-Compatible) Flux Workshop
Regular price £22.29 £22.29