Keyestudio Bluetooth Sensor Shield

CCAA100058
£14.99

1 in stock

FEATURES
  • Flux SKU:
    CCAA100058
  • Length (mm):
    53
  • Width (mm):
    48
  • Height (mm):
    25
  • Brand:
    Keyes
  • Brand Series:
    Keyestudio
  • Main Colour:
    Black
  • Country of Manufacture:
    China
  • MPN:
    KS0255
  • UPC:
    Does Not Apply
  • Minimum Operating Temperature:
    -5°C
  • Maximum Operating Temperature:
    65°C
  • Number of Items:
    1
  • Hardware Compatibility:
    Arduino UNO
    Arduino DUEMILANOVE
    Arduino LEONARDO
    Arduino MEGA
    Arduino DIECIMILA
  • Pin Pitch:
    2.54mm
  • Pin Arrangements:
    Sensor (SIG/VCC/GND)
  • Pass Through:
    Complete UNO 2.54 pass-through
    12 Digital I/O pins (S,V,G)
    6 Analog I/O pins (S,V,G)
    RX/TX pins (S,V,G)
  • Format:
    Bluetooth 4.0
  • Chipset:
    CC2541
  • Chipset Control:
    AT Command
  • Baud Rate:
    9600 (default)
  • Operating Modes:
    Default
    Sleep
  • Noted Onboard Components:
    3.3V regulator
    Bluetooth power switch
    Reset switch
    Virtual serial port jumper pins
DESCRIPTION
This little shield that could, takes a small and feisty HM-10 Bluetooth module and makes it easy to attach to UNOs, DUEMILANOVEs and MEGAs and gives them access to those much desired wireless capabilities as well as much more.
The shield gives you full access to all the digital and analog ports and provides each with its own VCC and GND. This is the typical required format that sensor modules are supplied in as can be seen in our range of sensor modules. The HM-10, is directly wired to the RX/TX pins and has a separate power switch. The jumper pins also provide a means of moving the HM-10 to digital pins 2/3 if you require access to the RX/TX.
Please do not hesitate to contact us if you require further information regarding the shield's operation.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question