Keyes Arduino NANO CNC Sheild GRBL V4 A4988 3D Printer 12V

CCAA100066
£6.89

3 in stock

This shield is ideally suited to converting a simple Arduino NANO into a CNC machining workhorse. The module provides 3 axis of control along with connections f

FEATURES
  • Flux SKU:
    CCAA100066
  • Brand:
    Keyes
  • MPN:
    HR0657
  • UPC:
    Does Not Apply
  • Length:
    72
  • Width:
    58.7
  • Height:
    15
  • Weight:
    30
  • Packaging type:
    OEM
  • Main Colour:
    Red
  • Country of Manufacture:
    China
  • Drive Voltage:
    12V External motor power
  • Characteristics:
    3 Axis CNC control
    A4988 Driver compatible
    Spindle control
    Coolant control
  • Pin pitch:
    2.54
  • Connectors:
    5.5mm DC Jack (2.1mm pin)
    3 4988 Sockets
  • Interfaces:
    Abort/Hold/Resume
    Emergency stop
    3 Axis end stops
    I2C
    UART
    Jumper based step setting
    Reset switch
  • Shield Compatibility:
    Arduino NANO
  • Operating Temperature:
    -40°C to 85°C (unconfirmed)
  • Number of Pieces:
    1
DESCRIPTION
This shield is ideally suited to converting a simple Arduino NANO into a CNC machining workhorse. The module provides 3 axis of control along with connections for limit switches, spindle control, an emergency stop, coolant control and hold buttons. The board is based on the well documented open source the use of GRBL.
The shield is designed to accept A4988 drivers. Each drivers step settings can be controlled via the onboard jumper connections. To power the motors a 12V DC supply is required which is then connected to the DC input. The logic on the otherhand is powered from the Arduino itself.
Please do not hesitate to contact us if you require further information regarding the shield's operation.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question