10pcs 30cm Yellow Test Hook Clips
Country of Manufacture:
Does Not Apply
Minimum Operating Temperature:
Maximum Operating Temperature:
Number of Items:
10 30cm Clip-F 2.54mm lead
Suitable (Noted projects):
Individual push clip mechanisms
2.5mm Push Clip
This set is ideally suited to fault finding around a circuit board, allowing you to track voltages on particular legs of chips. The clips feature standard sockets for use with a pin pitch of 2.54mm.
The clip mechanism operates by pulling the tip closer to the housing, revealing two conducting jaws that open to approximately 2.5mm. Placing the jaws over the component to be connected and releasing allows the spring mechanism to close the jaws. Securing the connection in place.
Supplied as a single 10-way ribbon the set can easily be separated into individual wires or smaller ribbons to suit your needs. These are ideally suited to being used with a logic analyzer to follow logic circuit values through a circuit, making them useful for fault finding and prototyping.