JYE-Tech DSO068 Digital Oscilloscope Kit

IBAA100181
£74.19

2 in stock

FEATURES
  • Flux SKU:
    IBAA100181
  • Length (mm):
    140
  • Width (mm):
    70
  • Height (mm):
    30
  • Solder Level:
    Through-hole
  • Brand:
    JYE-Tech
  • Main Colour:
    Blue
  • Country of Manufacture:
    China
  • MPN:
    06804K
  • UPC:
    Does Not Apply
  • Minimum Operating Temperature:
    -40°C
  • Maximum Operating Temperature:
    85°C
  • Number of Items:
    1
  • Parts list:
    1 Main board (SMD pre-soldered)
    1 Graphic LCD board
    1 BNC-KY lead
    2 510k Resistor
    1 200k Resistor
    2 2M Resistor
    1 20k Resistor
    2 300Ω Resistor
    1 180Ω Resistor
    2 120Ω Resistor
    2 3.3k Resistor
    3 470Ω Resistor
    1 0Ω Resistor
    4 10k Resistor
    5 1k Resistor
    1 10M Resistor
    2 IN4148 Diode
    3 100µH Inductor
    1 20MHz Crystal oscillator
    1 USB-Mini socket
    1 6x6mm Micro switch
    2 300pF Ceramic capacitor
    1 3pF Ceramic capacitor
    1 1pF Ceramic capacitor
    2 120pF Ceramic capacitor
    12 0.1µF Ceramic capacitor
    2 15pF Ceramic capacitor
    1 0.1µF 100V Ceramic capacitor
    1 5V Passive buzzer
    1 3mm Red LED
    2 2pcs M-M 2.54mm black pin header
    2 8550 Transistor
    1 10µF 16V Electrolyitic capacitor
    5 100µF 16V Electrolyitic capacitor
    1 5.5mm (2.1mm pin) DC Socket
    1 JYE116 Step up board
    1 JYE120 Neg.P.S convertor board
    1 JYE117 ON/Off Switch board
    1 JYE118 Battery charger board
    1 JYE119 UART-USB board
    3 Slide switch
    1 Rotary encoder
    1 20pcs M-M 2.0mm black pin header
    2 2pcs M-M 2.0mm black pin header
    2 5x2pcs M-M 2.54mm black pin header
    1 Case kit
    1 Fixing kit
  • USB Powered:
    True
  • Impedance:
    1MΩ
  • Type:
    2.4" Graphic LCD
  • Resolution:
    128x64
  • Contrast Control:
    Yes
  • Format:
    UART
  • Noted Onboard Components:
    Backlight ON/OFF control
  • Noted Circuit Types/Features:
    Built-in charger
  • Frequency range:
    1Hz-100KHz (41 frequencies)
  • Amplitude:
    0.3/1/3/5V
  • Maximum real-time sampling rate:
    2MSps
  • Maximum equivalent-time sampling rate:
    20MSps
  • Accuracy:
    8bit
  • Analog bandwidth:
    0-3MHz
  • Vertical sensitivity:
    10mV-5V/Div
  • Maximum input voltage:
    50Vpp (1:1 probe)
    400Vpp (10:1 probe)
  • Coupling modes:
    DC
    AC
    GND
  • Horizontal time base range:
    0.5µs- 10m/Div
  • Features:
    256/512/1024 Record length
    HOLD function
    auto/normal/single Trigger
    rising/falling edge Trigger type
    0% - 100% of Capture buffer adjustable trigger Position
    Save captured waveform to EEPROM
    Upload screen display as bitmap file
    Upload waveform as CSV file
DESCRIPTION
This is a kit encompassing all the components for building an oscilloscope. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering while resulting in a practical device useful for future electronic projects. A detailed set of printed instructions are included in the kit.
This kit comes with various options for powering the device via a 5.5mm DC connector. The board has mounting holes to allow the board to be mounted easily to a panel. Furthermore a BNC probe is also included to get you up and measuring in no time.
Furthermore, this kit once complete is fully compatible with jyeLAB software. Allowing the scope to operate as a USB scope. This allows you to connect the scope up to your PC as an output for your measurements.
If you require assistance using the kit, please do not hesistate to contact us.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question