JYE-Tech DSO138mini Digital Oscilloscope DIY Kit

IBAA100187
Sold out
£24.39

FEATURES
  • Flux SKU:
    IBAA100187
  • Length (mm):
    112
  • Width (mm):
    93
  • Height (mm):
    24
  • Solder Level:
    Through-hole
  • Brand:
    JYE-Tech
  • Main Colour:
    Red
  • Country of Manufacture:
    China
  • MPN:
    13805K
  • UPC:
    Does Not Apply
  • Minimum Operating Temperature:
    -40°C
  • Maximum Operating Temperature:
    85°C
  • Number of Items:
    1
  • Parts list:
    1 Main board (SMD pre-soldered)
    1 Analog board
    1 XH2.54 Clip lead
    2 100k Resistor
    1 1.8M Resistor
    2 200k Resistor
    1 2M Resistor
    1 20k Resistor
    2 300Ω Resistor
    2 180Ω Resistor
    2 120Ω Resistor
    3 1.1k Resistor
    2 100µH Choke
    1 2.0V Zener Diode
    4 6x6mm Micro switch
    2 5-30pF Trim capacitor
    3 0.1µF Ceramic capacitor
    1 220pF Ceramic capacitor
    1 120pF Ceramic capacitor
    1 3pF Ceramic capacitor
    1 1pF Ceramic capacitor
    1 2pin XH2.54 Socket
    5 100µF 16V Electrolyitic capacitor
    3 2P3T Slide switch
    1 5.5mm (2.1mm pin) DC Socket
    1 10pcs M-M 2.54mm black pin header
    2 2pcs M-M 2.54mm black pin header
    1 10pcs M-F 2.54mm black pin header
    2 2pcs M-F 2.54mm black pin header
    1 BNC Socket
    4 Adhesive rubber feet
  • USB Powered:
    True
  • Impedance:
    1MΩ
  • Mounting Hole Size:
    M2
  • Mounting Dimensions:
    66/58mm
  • Type:
    2.4" Graphic LCD
  • Resolution:
    128x64
  • Buffer Memory:
    1024 bytes
  • Frequency range:
    1Hz
  • Waveforms:
    Square
  • Amplitude:
    3.3V
  • Maximum real-time sampling rate:
    1Msps
  • Accuracy:
    12bit
  • Analog bandwidth:
    0-200KHz
  • Vertical sensitivity:
    10mV-5V/Div(1-2-5 progressive)
  • Maximum input voltage:
    50Vpp (1:1 probe)
    400Vpp (10:1 probe)
  • Coupling modes:
    DC
    AC
    GND
  • Horizontal time base range:
    10μs-50s/Div(1-2-5 progressive)
  • Waveform capture:
    Automatic
    Regular
    One-shot
  • Features:
    Adjustable vertical displacement
    Rising or falling edge trigger available
    Adjustable trigger level position
    Observable trigger waveform
    HOLD function
DESCRIPTION
This is a kit encompassing all the components for building an oscilloscope. The kit makes ideal practice for hand soldering while resulting in a practical device useful for future electronic projects. A detailed set of printed instructions are included in the kit. This is an advanced DIY kit and as such will arrive unsoldered. Please note that this kit contains SMD components. These are typically seen as complex components to hand solder as such previous soldering experience is recommended.
This kit comes with various options for powering the device via USB or a 3.5 - 6V DC source. The board has mounting holes to allow the board to be mounted easily to a panel. Furthermore a BNC probe is also included to get you up and measuring in no time.
If you require assistance using the kit, please do not hesistate to contact us.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question