JYE-Tech DSO062 Digital Oscilloscope DIY Kit
FEATURES
-
Flux SKU:
IBAA100188 -
Length (mm):
110 -
Width (mm):
65 -
Height (mm):
25 -
Brand:
JYE-Tech -
Main Colour:
Green -
Country of Manufacture:
China -
MPN:
06204KP -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Parts list:
1 Main board (SMD pre-soldered)
2 Panel board
1 Graphic LCD board
1 BNC-Crocadile lead
1 1mH Inductor
1 IN4004/7 Diode
5 100µF 16V Electrolyitic capacitor
1 470µF 25V Electrolyitic capacitor
1 L7805 TO220 IC
1 TO220 Heatsink
3 2P3T Slide switch
9 6x6mm Micro switch
1 BNC Socket
1 5.5mm (2.1mm pin) DC Socket
1 4pcs M-M 2.00mm black pin header
1 20pcs M-M 2.00mm black pin socket
1 2x5pcs M-M 2.54mm black pin socket
1 Fixings kit -
Solder Level:
Through-hole -
Impedance:
1MΩ -
Mounting Hole Size:
M3 -
Mounting Dimensions:
69/57mm -
Type:
2.4" Graphic LCD -
Resolution:
128x64 -
Frequency range:
500Hz -
Waveforms:
Square -
Amplitude:
5Vpp -
Maximum real-time sampling rate:
2Msps -
Accuracy:
8bit -
Analog bandwidth:
0-1MHz -
Vertical sensitivity:
100mV-5V/Div -
Maximum input voltage:
50Vpp (1:1 probe)
500Vpp (10:1 probe) -
Coupling modes:
DC
AC
GND -
Horizontal time base range:
10μs-10min/Div(1-2-5 progressive) -
Waveform capture:
Automatic
Regular
One-shot -
Features:
Adjustable vertical displacement
Rising or falling edge trigger available
Adjustable trigger level position
Observable trigger waveform
HOLD function
DESCRIPTION
This is the DSO062 oscilloscope. This new design offers more accurate and reliable meausurements. 100mV/div sensitivity and low background noise make the device particularly useful for measuring weak signals. A detailed set of instructions are available for the kit as well as a probe to get you started. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering while resulting in a practical device useful for future electronic projects. A detailed set of printed instructions are included in the kit.
This kit comes with various options for powering the device via a 5.5mm DC connector. The board has mounting holes to allow the board to be mounted easily to a panel. Furthermore a BNC probe is also included to get you up and generating in no time.
If you require assistance using the kit, please do not hesistate to contact us.
