Base Electronics Kit

Unbranded/Generic

  • Unit price per 

{"one"=>"Only {{ count }} left!", "other"=>"Only {{ count }} left!"}

FEATURES
  • Flux SKU:
    LAAA100127
  • Length (mm):
    230
  • Width (mm):
    160
  • Height (mm):
    24
  • Brand:
    Unbranded/Generic
  • Main Colour:
    Multi
  • Country of Manufacture:
    China
  • MPN:
    LAAA100127
  • UPC:
    Does Not Apply
  • Minimum Operating Temperature:
    -40°C
  • Maximum Operating Temperature:
    85°C
  • Number of Items:
    1
  • Parts list:
    1 MB-102 830pt Breadboard
    1 Breadboard power supply
    50 100mm M-M Jumper wire
    8 140mm M-M Jumper wire
    4 185mm M-M Jumper wire
    3 225mm M-M Jumper wire
    210 100-1M Resistor
    4 10K/100K Potentiometer
    12 LEDs 4 Colours
    6 Large tactile switches and caps
    2 1x40 2.54mm Pitch header pins
  • Pin Pitch:
    2.54mm
  • Output DC Voltage:
    3.3V
    5V
  • Drive Current:
    700mA
  • Backing Type:
    Adhesive
  • Chipset MPN:
    AMS1117 3.3
    AMS1117 5.0
  • Noted Onboard Components:
    Power LED
    Power switch
  • Noted Circuit Types/Features:
    USB 5V Output
  • Terminal Strip points:
    630
  • Distribution Strip points:
    200
  • Total points:
    830
  • Labelling:
    Yes
DESCRIPTION
A small kit that joins a group of useful prototyping components into a single value bundle. It is made up of a large breadboard, a power supply unit, a range of jumper leads and a component set with which you will have everything you need to embark on your next project.
The MB-102 prototyping board allows rapid prototyping without the need to solder any components. It is designed to have standard sockets with a pin pitch of 2.54mm, making it compatible with a large range of modules and components. It is solidly constructed to allow repeated use, with a life of 5000 insertions per point. This board makes a fantastic base upon which to wire your project. The board has a total of 830 points of which 200 run parallel length ways down the board for the purpose of supplying power. While the remaining 630 act as individual 5 pin rows. The rows and columns are labelled to allow accurate tracing throughout your project. The board comes with a foam sticky backing, allowing it to be stuck on to a surface to prevent it moving around. This however arrives sealed, requiring peeling to attach to a surface.
The power unit is ideally suited to powering a prototyping board such as the MB-102 which feature standard sockets with a pin pitch of 2.54mm. The supply is designed to be connected to either a USB cable or a DC adapter with a 5.5 x 2.1mm plug. When powered, the supply will produce 4 power rails and a USB socket. A pair of headers allow you to select between 3.3V or 5V. Each controls a pair of rails, giving you the option to have both a 3.3V/GND and 5V/GND set of rails.
Please do not hesitate to contact us if you require further information regarding the set's operation.

We Also Recommend