12V Infrared Relay Module and Remote
FEATURES
-
Flux SKU:
LBAA100164 -
Length (mm):
65 -
Width (mm):
40 -
Height (mm):
7 -
Brand:
Unbranded/Generic -
Main Colour:
Silver/Red -
Country of Manufacture:
China -
MPN:
LBAA100164 -
UPC:
Does Not Apply -
Minimum Operating Temperature:
-40°C -
Maximum Operating Temperature:
85°C -
Number of Items:
1 -
Parts list:
2 Infrared relay module
1 Infrared remote (CR2032 include) -
Pin Pitch:
2.54mm -
Type:
Electromechanical -
Channels:
1 -
Actuation Time:
< 10ms -
Format:
TTL Voltage -
Keypad Coloumns:
1 -
Keypad Rows:
2 -
Number of Keys:
2 -
Labelling:
ON, OFF -
Battery Required:
CR2025 -
Sensor Property:
Infrared -
Sensor Sweep:
60° -
Wavelength Detection Minimum:
700nm -
Wavelength Detection Maximum :
1mm
DESCRIPTION
This set is ideally suited to adding wireless control to your project. This is a kit of encompassing a transmitter and receiver module. There are times when mechanical switches are just not right for a project, what you really need is a little range between you and your project yet still be in control. This kit will facilitate this for you and allow you to send on or off messages through to control the relay.
This module is ideally suited to controlling larger voltages with project. This is a single channel relay module which can be used to activate up to 250V AC and 30V DC. This allows you to build in device control, operating remote lights or triggering systems when the module is supplied the signal.
The module has two LEDs that inform of the state of the module. A red power LED and a green activation LED that lights when a signal is received. When a signal is received a audible click can be heard as the relay triggers, connecting the output pins.
Please do not hesitate to contact us if you require further information regarding the module's operation.
| Pin Description | |
|---|---|
| GND | 0V |
| VCC | 12V |
| Terminal | Description |
|---|---|
| 1 | Active when HIGH |
| 2 | Common |
| 3 | Active when LOW |
